Flotation machine

flotation machine is formed by U through solid, hollow shaft inflation, suspension rotor and new type impeller

When flotation machine works, slurry is inhaled from the bottom of the trough to the space between impellers. Meanwhile, the low_pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole trough. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re-mis with air. The remained slurry flows to the next trough until becomes residue.

Specifications of Flotation Machine

Type Cubage(m³) Diameter of impellor(mm) Capacity(m³/min) Speed of impellor(r/min) Motor of impellor Weight (t/single trough) XJK-0.13 0.13 200 0.05-0.16 600 Y90L-4-1.5 0.23 XJK-0.23 0.23 250 0.12-0.28 500 Y90L-4-1.5 0.35 XJK-0.35 0.35 300 0.18-0.4 470 Y90L-4-1.5 0.43 XJK-0.62 0.62 350 0.3-0.9 400 Y100L-4-3 0.86 XJK-1.1 1.1 500 0.6-1.6 330 Y100M-4-5.5 1.38 XJK-2.8 2.8 600 1.5-3.5 280 Y100M-4-11 2.33 XJK-5.8 1.1 750 3-7 240 Y100M-4-22 3.5

Flotation machine